Back to home page.
Harsh Environment Air Cooled Condensor Units

Air Cooled condenser unit, constructed for highly corrosive applications including salt water, high wind or sand, chemical, harmonic vibration conditions.
Equipment constructed of 316S and 317S marine grade stainless steel, minimum carbon of 0.03C with bolt stainless steel fasteners using Teflon spacers. Compressor protected by stainless steel sleeve. Condenser fan is constructed of glass reinforced Marelon with heavy gauge marine cast aluminum. Motor is totally enclosed , operational up to 70 deg C Unit comes with sight glass, filter dried, access valves, and hot gas by-pass. Condenser coil is epoxy coated. Optional copper to copper treated coil is available.
Totally enclosed sealed water-proof electric box uses UL approved components. High/low pressure and freeze protection, phase and voltage monitors , circuit breaker protection and lock out relays are standard. Systems are designed to operate at temperature range from -10 Deg F to +130 Deg F. Various voltages available.
Applications include ships subject to harmonic vibration, commercial fishing vessels, large yachts, ocean front properties, hotels, industrial sites, ocean front residences, or any condition where a standard marine grade system will not provide years of optimal performance.

Systems available from 1 to 500 tons.

6 TON (72,000 BTU)



15 TON (180,000 BTU)



100 TON (1,200,000 BTU)


Manufactured By Quorum Marine & Electronics, Inc.
2951 SE Dominica Terrace, Stuart, Florida 34997
Tel (772) 220-0038 Toll Free (866) 227-7773 Fax (772) 220-0260


© 2013 Quorum Marine & Electronics, Inc. Worldwide Rights Reserved